By 
Door locks are meant to keep intruders out, and your things safe. This device can range from a simple latch to a more complicated system, with locks on both the inside and outside of the door. They are one of the most essential parts of any building, and so it can be a very stressful situation if they are not working, or are faulty.
The most common problem with door locks is when they get jammed, rusted, or just stop working altogether. There are several ways to solve these problems, and we will be discussing some of them in this article.
What are these issues?
There are many different types of door locks and they all work in different ways. The most common ones are keyed locks, which require a key to unlock them. These days there are also digital locks that can be opened with a pin code or remote control.
Problems can arise with any type of lock if you don’t take proper care of it or if it gets damaged for some reason. So here are some common ones. 
Locks not fitting the door correctly
Locks are usually fitted securely to doors, to hold them together with the door handle. But then when the lock starts to loosen this could be a potential problem, majorly because since the lock is no longer tightly fitted to the door, it can be easily removed, and whoever is trying to gain access to your apartment will do so without much trouble.
Therefore, it is important that you constantly check your door locks to be sure that they are still in place, do this, especially for external doors. If you find any loose locks, get them fixed immediately. Most times the problem could be from a loosened screw, if this is the issue, then you only just need to tighten the screw and it’s all set.
Lock gets jammed
Imagine being locked outside your apartment without a key to give you access back in. That can be terrible especially if it happens at a time when you’re unable to get across to a locksmith. There are several possible causes for this. One is that dirt and debris may have built up in the lock causing it to malfunction. If you ever experience this with your door lock, be sure to call for the service of a professional locksmith as soon as you can.
Lock out of order or broken
If your key ever breaks inside a door lock or the lock of your car, the first you should avoid is forcefully pulling it out. Not only can this cause more damage, but there is also no guarantee that you’ll be able to pull it out this way. If you’re unable to get it out after many attempts to gently do so, then the best thing is to contact a locksmith. A professional will be more skilled at dislodging the key’s component without causing any damage, if at all, very little. Locksmith North Melbourne uses a specific key removal kit to get the broken part of the key out without destroying the lock mechanism.
When the broken part is removed, ensure you try the lock with a spare key to be sure that it is in a perfect condition. If it is not, then you may need to change the locks. Note that, while trying to remove a broken key, you should only pull straight, and not side-by-side as this motion can destroy the lock further.
Spinning lock cylinder
This is common with keyed locks. If you ever find that the whole of a door lock cylinder turns when you try opening the door, then there might be a serious issue there. When you turn a key inside the lock, it should spin easily to both sides, whether you’re trying to open or close the door. However, if the whole cylinder turns while doing this, it may result in you being locked out of your home, or not even locking the door at all, leaving your belongings exposed.
This is sometimes caused by a broken or loosened screw, which will only require you to tighten or replace it. While this issue can be easily solved, it can be a huge disturbance if not corrected in time.
Preventing door lock malfunction in the future
Avoid forcing keys into locks
When you force keys into locks for any reason at all, you are gradually damaging the lock. If the key doesn’t go in after multiple attempts, try a spare. The key could be damaged, or you just might be using the wrong one.
Have a locksmith on your contact list
Since problems with locks can be very disturbing, you need to have help on the way as soon as possible. Even if you do not expect to have any issues with your locks, you should have the contact of a locksmith, just in case, there is a need for it in the future.
Have a professional fix your locks
Most problems with locks happen because they were not properly installed in the first place. So the first step to avoiding these issues is by ensuring that you have left no chances for such.
Get a professional locksmith to fix your locks. This way you’re sure to encounter very little or no problem with your locks.
Don’t wait until it gets worse
If your door lock gets broken or faulty, be sure to fix it as soon as possible. You can do this by replacing the entire lock or fixing the problem with the keyhole. Replacing the locks could be a better option, as it will likely save you future repairs; you never can tell which part of the lock is about to get damaged as well. This is usually fairly easy to do as long as you have the right tools on hand. If you constantly have an issue with a particular lock, then it may be just time to try a different one.
Comments